What To Do; What Next - Sun Microsystems Fire V890 Service Manual
Hide thumbs
Also See for Fire V890:
- Owner's manual (227 pages) ,
- Rack mounting manual (106 pages) ,
- Diagnostic manual (104 pages)
Table of Contents
Advertisement
What to Do
1. Remove the two Phillips screws securing the status assembly to the chassis.
Be sure to support the status assembly as you remove the screws so that the ribbon
cable connected to the back of the assembly is not jarred.
2. Disconnect the ribbon cable from the connector on the status assembly and
remove the assembly from the system.
3. Place the status assembly on an antistatic mat.
What Next
To replace the CPU/Memory board status assembly, complete this task:
"How to Install the CPU/Memory Board Status Assembly" on page 63
■
62
Sun Fire V890 Server Service Manual • October 2005
Advertisement
Table of Contents
