Before You Begin; What To Do - Sun Microsystems Fire V890 Service Manual

This requirement does not apply to any component that is:
Installed or removed as part of a hot-plug operation
■
Installed or removed before the operating system is installed
■
Installed as an identical replacement for a component that is already recognized
■
by the operating system
Caution – All internal options (except disk drives and power supplies) must be
installed only by qualified service personnel.

Before You Begin

Caution – Before you power on the system, make sure that the front and side doors
and all plastic outer panels are properly installed.
You need a system console in order to issue software commands. See:
"About Setting Up a Console" on page
■

What to Do

1. Turn on power to any peripherals and external storage devices.
Read the documentation supplied with the device for specific instructions.
2. Turn on power to the console.
3. Insert the system key into the front panel keyswitch and turn the keyswitch to the
Diagnostics position.
16.
Chapter 1 Preparing to Service the System 11