What Next - Sun Microsystems Fire V890 Service Manual

3. Tighten the two captive Phillips screws that secure the fan tray to the brackets.

What Next

To reassemble the system, complete this task:
"How to Close a Side Door" on page 23
■
If you installed this part as a new option while the system was powered off, you
need to perform a reconfiguration boot. A reconfiguration boot is required in order
for the operating system to recognize the new device. See:
"How to Initiate a Reconfiguration Boot" on page 10
■
Chapter 3 Servicing the Input/Output Board Side Components 79