What To Do - Sun Microsystems Fire V890 Service Manual

What to Do

1. Remove the removable media bezel from the front of the system.
Remove the two Phillips screws securing the bezel to the front of the system.
2. If there is a metal filler panel in the slot, remove it.
Using a flathead screwdriver, carefully pry the metal filler panel from the slot.
3. If you are installing a full-height device into the left-side bay, remove the divider
shelf from the bay.
4. Install the plastic guide rails onto the device.
If you are replacing a faulty device, transfer the guide rails to the new device. If you
are installing a device for the first time, the guide rails and screws are shipped in the
accessory kit that is shipped with your system.
5. Align the device with the guides in the empty slot.
Chapter 4 Removing and Installing Storage Devices 149