What to Do
1. Identify the slot into which you want to install the CPU fan tray.
The primary CPU fan tray occupies CPU fan tray slot 1. For information about CPU
fan tray LEDs, see
Caution – If you are performing a hot-swap procedure, do not put your hand into
the empty fan bay. The fans in the populated fan tray are still spinning.
2. Align the CPU fan tray with its slot in the chassis.
The arrow label on the fan tray indicates the top side of the fan tray.
3. Slide the fan tray into the chassis until the connector on the fan tray is firmly
seated in its socket.
4. Tighten the two captive screws on the fan tray.
What Next
To reassemble the system, complete this task:
"About Fan Tray LEDs" on page
Chapter 2 Servicing the Motherboard Side Components
266.
51