What Next - Sun Microsystems Fire V890 Service Manual

5. If you are not immediately replacing the device, complete the following steps:
a. Install a metal filler panel into the device's slot.
b. Replace the removable media bezel.
Replace the two Phillips screws that secure the bezel to the system chassis.
c. Install a plastic filler panel into the device's slot in the removable media bezel.

What Next

To replace a tape drive, complete this task:
"How to Install a Tape Drive" on page 148
■
To reassemble the system, complete this task:
"How to Close a Side Door" on page 23
■
If you are not replacing this part right away, you need to perform a reconfiguration
boot in order for the operating system to recognize the configuration change. See:
"How to Initiate a Reconfiguration Boot" on page 10
■
Chapter 4 Removing and Installing Storage Devices 147