What Next; How To Install The System Status Assembly; Before You Begin; What To Do - Sun Microsystems Fire V890 Service Manual

What Next

To replace the system status assembly, complete this task:
"How to Install the System Status Assembly" on page 166
■
How to Install the System Status
Assembly

Before You Begin

Complete this task:
"How to Avoid Electrostatic Discharge" on page 26
■

What to Do

1. Attach the system status cable (P31) to the connector on the side of the system
status assembly.
2. Align the status assembly into position on the front of the system.
Insert the tabs on the left side of the status assembly into their cutouts first, as you
align the metal tab on the right top side with its cutout.
3. Replace the five Phillips screws that secure the status assembly to the front of the
system.
4. Replace the removable media assembly bezel on the front of the system.
Replace the two Phillips screws that secure the bezel to the system front.
What Next
To reassemble the system, complete this task:
"How to Close a Side Door" on page 23
■
166 Sun Fire V890 Server Service Manual • October 2005