How To Remove A Memory Module; Before You Begin; What To Do; How To Power Off The System - Sun Microsystems Fire V890 Service Manual
Hide thumbs
Also See for Fire V890:
- Owner's manual (227 pages) ,
- Rack mounting manual (106 pages) ,
- Diagnostic manual (104 pages)
Table of Contents
Advertisement
How to Remove a Memory Module
Before You Begin
Read the section
Complete these tasks:
"How to Power Off the System" on page 5
■
"How to Open and Remove a Side Door" on page 21
■
"How to Avoid Electrostatic Discharge" on page 26
■
"How to Remove a CPU/Memory Board" on page 30
■
What to Do
Caution – Dual inline memory modules (DIMMs) are made of electronic
components that are extremely sensitive to static electricity. Static electricity from
your clothes or work environment can destroy the DIMM. Do not remove any
DIMM from its antistatic packaging until you are ready to install it. Handle the
modules only by their edges. Do not touch the components or any metal parts,
including the gold contacts on the bottom edge of the module. Always wear a
grounding strap when you handle the modules.
40
Sun Fire V890 Server Service Manual • October 2005
"About Memory Modules" on page
221.
Advertisement
Table of Contents
