What Next - Sun Microsystems Fire V890 Service Manual

Hide thumbs Also See for Fire V890:

Table of Contents

2. Connect the opposite end of the cable to the system's serial port connector or to

serial port A on the serial splitter cable.

3. Connect the terminal's power cable to an AC outlet.

4. Set the terminal to receive:

At 9600 baud

An 8-bit signal with no parity and 1 stop bit

See the documentation accompanying your terminal for more information.

What Next

You can now issue system commands and view system messages. Continue with

your installation or diagnostic procedure as needed.

Sun Fire V890 Server Service Manual • October 2005