What To Do - Sun Microsystems Fire V890 Service Manual

What to Do

1. Identify the bay into which you want to install the power supply.
For information about LEDs, see
2. Slowly slide the power supply into its bay until the connectors on the power
supply are fully engaged with the connectors on the power distribution board.
Caution – If you are hot-plugging a redundant supply, take care to avoid jarring or
shocking the system. Also, do not engage and disengage the supply in rapid
succession. Rapid seating and unseating of a power supply will result in false error
conditions.
"About Power Supply LEDs" on page
Chapter 5 Removing and Installing Miscellaneous Assemblies
265.
161