Sun Microsystems Fire V890 Service Manual page 113

3. Insert the PCI card into the appropriate slot on the I/O board.
If you are installing a PCI long card:
a. Insert the faceplate side of the PCI card into the appropriate opening on the
rear panel. At the same time, insert the other end of the card into the
corresponding groove on the PCI card bracket.
b. Push the card into the slot on the I/O board until it is fully seated.
If you are installing a PCI short card:
a. Align the faceplate side of the PCI card with the appropriate opening on the
rear panel.
b. Push the card into the slot on the I/O board until it is fully seated.
Chapter 3 Servicing the Input/Output Board Side Components 85