Lithium Battery - Sun Microsystems Fire V890 Service Manual

The following caution applies only to devices with a Standby power switch:
Caution – The power switch of this product
functions as a standby type device only. The
power cord serves as the primary disconnect
device for the system. Be sure to plug the
power cord into a grounded power outlet that
is nearby the system and is readily accessible.
Do not connect the power cord when the
power supply has been removed from the
system chassis.

Lithium Battery

Caution – The Sun Fire V890 system I/O
board contains lithium batteries. Batteries are
not customer replaceable parts. They may
explode if mishandled. Do not dispose of the
battery in fire. Do not disassemble it or
attempt to recharge it.
System Unit Cover
You must open the side doors of your Sun Fire V890 server to add cards, memory, or internal options. Be sure to close
and secure the doors before powering on your system.
Caution – Do not open. Qualified Service
Personnel Only. Failure to take this precaution
may result in personal injury and system
damage.
312 Sun Fire V890 Server Service Manual • October 2005