How To Install An I/O Fan Tray; Before You Begin; What To Do - Sun Microsystems Fire V890 Service Manual

How to Install an I/O Fan Tray

All fan trays feature a hot-swap capability. You can remove and replace a faulty fan
tray without shutting down the operating system or turning off the system power.
For additional details, see
on page
page

Before You Begin

If you are not performing a hot-swap procedure, complete the following task:
"How to Power Off the System" on page 5
■
Complete these tasks:
"How to Open and Remove a Side Door" on page 21
■
"How to Avoid Electrostatic Discharge" on page 26
■

What to Do

1. Locate the I/O fan tray slot into which you want to install the fan tray.
2. Slide the fan tray into the brackets until the connector on the fan tray is fully
seated into its socket.
The label on the I/O fan tray indicates the orientation of the fan tray.
Caution – If you are performing a hot-swap procedure, do not put your hand into
the empty fan bay. The fans in the populated fan tray are spinning.
78 Sun Fire V890 Server Service Manual • October 2005
"About Hot-Pluggable and Hot-Swappable Components"
6. For more information about I/O fan trays, see
234.
"About Fan Trays" on