Safety Agency Compliance Statements - Sun Microsystems Fire V890 Service Manual

Safety Agency Compliance Statements

Read this section before beginning any procedure. The following text provides safety precautions to follow when
installing a Sun Microsystems product.
Safety Precautions
For your protection, observe the following safety precautions when setting up your equipment:
Follow all cautions and instructions marked on the equipment.
■
Ensure that the voltage and frequency of your power source match the voltage and frequency inscribed on the
■
equipment's electrical rating label.
Never push objects of any kind through openings in the equipment. Dangerous voltages may be present.
■
Conductive foreign objects could produce a short circuit that could cause fire, electric shock, or damage to
your equipment.
Symbols
The following symbols may appear in this book and/or on the product:
Caution – There is risk of personal injury and
equipment damage. Follow the instructions.
Caution – Hot surface. Avoid contact. Surfaces
are hot and may cause personal injury if
touched.
Caution – Hazardous voltages are present. To
reduce the risk of electric shock and danger to
personal health, follow the instructions.
Depending on the type of power switch your device has, one of the following symbols may be used:
On – Applies AC power to the system.
Off - Removes AC power from the system.
Standby – The On/Standby switch is in the
standby position.
310 Sun Fire V890 Server Service Manual • October 2005