6. Place the PCI card on an antistatic mat.
7. If you are not replacing the PCI card immediately, install a PCI filler panel into
the system rear panel.
a. Slide a PCI filler panel into the slot on the system rear panel.
b. Rotate the PCI retaining clip over the back of the filler panel until it snaps into
place.
What Next
To replace the PCI card, complete this task:
"How to Install a PCI Card" on page 83
■
To reassemble the system, complete this task:
"How to Close a Side Door" on page 23
■
82
Sun Fire V890 Server Service Manual • October 2005