General Description; General; Features - ADEMCO VISTA-128B Installation And Setup Gude

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section

General

Features

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
General
The VISTA-128B is an 8-partition, UL commercial burglary control panel that supports up to
128 zones using basic hardwired, polling loop, and wireless zones. It also includes zones for
supervision of bells, phone lines, keypads, RF Receivers, and relays. In addition, the control
offers scheduling capabilities and allows certain operations to be automated by pressing a
single button. The system has the capability to interface with an ECP long range radio unit
that can send Contact ID messages and an alpha numeric paging device. The control can be
connected to the ADEMCO PassPoint system (via the Vista Gateway Module) or a VistaKey
module (via the polling loop) to provide a fully integrated security and access control system.
Features
Basic Hardwired Zones
Provides 9 style-B hardwire zones with the following characteristics:
•
EOLR supervision (optional for zones 2-8) supporting N.O. or N.C. sensors
(EOLR supervision required for fire and UL burglary installations)
•
Individually assignable to one of 8 partitions
•
Up to 16 2-wire smoke detectors on zone 1
•
4-wire smoke or heat detectors on zones 1-8 (power to 4-wire smoke detectors must be
supervised with an EOL device)
•
Up to 50 2-wire latching glassbreak detectors on zone 8
Optional Expansion Zones
Polling Loop Expansion
Supports up to 120 additional hardwire zones using a built-in polling (multiplex) loop
interface. Current draw can total up to 128mA. Polling loop zones have the following
characteristics:
•
Must use RPM (Remote Point Module) devices
•
Supervised by control panel
•
Individually assignable to one of 8 partitions

General Description

S E C T I O N 1
1-1