ADEMCO VISTA-128B Installation And Setup Gude page 42

VISTA-128B Installation and Setup Guide
Compatible Polling Loop Devices
4208
4190WH
4278
4275
4194
4192SD
4192SDT
4192CP
7-2
8-Zone Expander
2-Zone Expander
Quad PIR
Dual PIR
Surface Mount Reed
Contact (Wide Gap)
Photoelectric Smoke
Detector Devices
Photoelectric Smoke
Detector w/Heat
Detector
Ionization Smoke
Detector
•
Accommodates up to 8 zones via the polling
loop.
•
DIP switch-programmable.
•
The first two zones can be either normal or fast
response (DIP switch selectable).
•
All zones are EOLR-supervised (first six zones =
4.7k ohms; last two zones = 30k ohms), provided
with the 4208.
•
Accommodates up to 2 zones via the polling
loop.
•
DIP switch-programmable.
•
The left zone can be EOLR-supervised (required
in UL installations), can accept either open or
closed circuit sensors, and can be set for fast
response.
•
The right zone is unsupervised and can accept
closed circuit sensors only (cannot be used in
UL installations).
•
Quad element PIR with built-in RPM (connects
directly to the polling loop).
•
DIP switch-programmable.
•
Includes mirrors for both wide-angle and
curtain/long-range applications.
Features a nonsupervised auxiliary sensor loop
that can accept closed circuit sensors only
(cannot be used in UL installations).
•
Dual-element PIR with built-in RPM (connects
directly to the polling loop).
•
DIP switch-programmable.
•
Includes mirrors for both wide-angle and
curtain/long-range applications and can use the
1875PA Pet Alley mirror.
•
Built-in selectable pulse count capability.
•
Wide-gap, surface-mounted reed contact with
built-in RPM (connects directly to the polling
loop).
•
DIP switch-programmable.
•
One-piece photoelectric smoke detector with
built-in RPM.
•
DIP switch-programmable.
•
One-piece photoelectric smoke detector with
135°F (57°C) heat detector and built-in RPM.
•
DIP switch-programmable.
•
One-piece products of combustion ionization
detector with built-in RPM.
•
DIP switch-programmable.