ADEMCO VISTA-128B Installation And Setup Gude page 146

VISTA-128B Installation and Setup Guide
Bypass Commands
Activation times 1 (Beginning), 2 (End), 3 (During) are the only valid choices for bypass
commands. If 3 (During) is selected for auto-bypassing, the system will bypass the zone(s)
specified on a particular zone list at the beginning of the window and unbypass the zone(s)
at the end of the window. If it is selected for auto unbypassing, the system will remove
the bypass of the zone(s) at the beginning of the window and will restore the bypass of the
zone(s) at the end of the window.
Open/Close Windows
Activation time 3 (During) is the only valid choice for these commands.
Access Control Commands (use only with VistaKey Modules)
24-12
Action Code
30 Auto bypass - Zone list
31 Auto unbypass - Zone list
Action Code
40 Enable Opening Window by partition
41 Enable Closing Window by partition
42 Enable Access Window for access group
50 Off-Normal Reminder
(Starts local keypad beeping if fire off-
normal condition exists)
Action Code
55 Access Point Grant
56 Access Point Grant with Override
57 Access Point Protect
58 Access Point Bypass
59 Access Point Lock
60 Access Point Exit
61 Access Point Group Grant
62 Access Point Group Grant with Override
63 Access Point Group Protect
64 Access Point Group Bypass
65 Access Point Group Lock
66 Access Point Group Exit
67 Access Point Partition Grant
68 Access Point Partition Grant with Override
69 Access Point Protect by Partition
70 Access Point Bypass by Partition
71 Access Point Lock by Partition
72 Access Point Exit by Partition
73 Access Point Trigger On
74 Access Point Trigger Off
Action Specifier
Zone list #
Zone list #
Action Specifier
Partition(s)
Partition(s)
Access Group
None
Action Specifier
Access Point #
Access Point #
Access Point #
Access Point #
Access Point #
Access Point #
Group #
Group #
Group #
Group #
Group #
Group #
Partition #
Partition #
Partition #
Partition #
Partition #
Partition #
Trigger #
Trigger #