Changing A Master, Manager, Or Operator Code; Adding An Rf Key To An Existing User; Deleting A Master, Manager, Or Operator Code; To Exit The User Edit Mode - ADEMCO VISTA-128B Installation And Setup Gude

VISTA-128B Installation and Setup Guide

Changing a Master, Manager, or Operator Code

Enter [Installer code]* + 8 + [User number (002-150)] + [new user's code]
* Or Master or Manager code, but must be code with higher level of authority than the code
being changed (i. e., Master Code can change a Manager or Operator-level Code, but cannot
change another Master Code; a Manager Code can change an Operator-level Code, but
cannot change a Master or another Manager Code).
User Number = 003
NEW USER?

Adding an RF Key to an Existing User

To add an RF key to an existing user, or to change a user's global arm option, first delete that
user's code, then re-add the user code as described in the "To ADD a Master, Manager, or
Operator Code" paragraph.

Deleting a Master, Manager, or Operator Code

Enter [your code]* + 8 + [User number (002-150)] + [your code again]
* Installer, Master or Manager Code, but must be code with higher level of authority than
the code being deleted (i.e. Master Code can delete a Manager or Operator-level Code, but
cannot delete another Master Code; a Manager Code can delete an Operator-level Code, but
cannot delete a Master or another Manager Code).
OK TO DELETE 003?
0=NO
A user code can only be deleted from the partition through which it was entered. If trying to delete
from another partition, the message "User [XXX] Not Deleted" will be displayed.

To EXIT the User Edit Mode

Press either [ ] or [#], or don't press any key for 10 seconds.
28-6
The system detects that the user number is already assigned,
and will prompt if this is a new user.
Press 0 (NO).
The system will then confirm that the change is allowed based
on authorization level.
The system will prompt to confirm that you want to delete this
user. Press 0 (NO) or 1 (YES).
1=YES
If "yes", that user's code will be removed from all partitions to
which it was assigned, and all authorization levels and other
information about that user will be deleted. Note that a user
can only be deleted by a user with a higher authority level. A
user cannot delete himself.