ADEMCO VISTA-128B Installation And Setup Gude page 101

2. In table 2, enter devices used on Auxiliary Power. Calculate standby and alarm currents,
then add to get Auxiliary Power current subtotal.
Table 2: Auxiliary Power Current Load
Device Model # Device Current X # of Units =
3. In table 3, enter devices connected to the Alarm Output. Calculate alarm currents, then
add to get the Alarm Output current subtotal.
Table 3: Alarm Output Current Load
Device Model # Device Current X # of Units =
Auxiliary Power Subtotal
(terminals 6 & 7 – 750mA max.)
Alarm Output Subtotal
(terminals 4 & 5 - 1.7A max.)
Section 18 – Final Power-Up Procedure
Total Current
Standby
Total Current
Standby
XXXXXX
XXXXXX
XXXXXX
XXXXXX
XXXXXX
XXXXXX
XXXXXX
Alarm
Alarm
18-5