ADEMCO VISTA-128B Installation And Setup Gude page 171

Open/Close Rep.?
0 = NO , 1 = YES
Access Group?
Enter 0-8
RF Button ?
0=NO , 1=YES
Enter Button ZN #
(001-087)
Multi-Access ?
0 = NO , 1 = YES
Global Arm ?
0 = NO , 1 = YES
Part. 2 – SHOP ?
0 = NO , 1 = YES
*
Part. 1 A0 WHSE
User 003 Auth=3G.
Press 0 (NO) or 1 (YES), depending on whether or not
arming/disarming by this user will trigger Opening and Closing
reports. This prompt appears only if the Installer Code is used to
add a user.
If access schedules have been programmed, this prompt appears.
Enter the user's access group number (1-8) if this user should have
limited access to the system. Enter 0 if no access group should be
assigned.
If a 5800 Series button transmitter has been enabled for
arming/disarming functions, and is not assigned to a user, this
prompt will appear. Press 0 (NO) or 1 (YES).
If "yes" was given as the answer to the RF button question, the zone
number for the button will be requested. Enter any one of the zone
numbers assigned to the button transmitter as AWAY, STAY or
DISARM. The system will then assign all buttons of the transmitter
to this user number.
Press 0 (NO) if the user is to have access to this partition only.
Press 1 (YES) if the user is to have access to more than one
partition. If NO, the program exits this mode. If YES, the keypad
prompts for the Global Arm option for this user.
Press 0 (NO) or 1 (YES), depending on whether this user will be
allowed to arm more than one partition via Global Arm prompts
(described in the Keypad Functions section).
The keypad now prompts for the user's access to the next partition.
Press 0 (NO) or 1 (YES), depending on whether this user will have
access to the displayed partition number. If NO, the keypad displays
this prompt for the next partition number in sequence.
If YES, the keypad prompts for the following:
•
User's authority level in the displayed partition (see Authority
Level prompt above).
•
Open/Close option for this user in the displayed partition (see
Open/Close prompt above).
•
Global Arm option for this user in the displayed partition.
When all partitions have been displayed, the keypad will scroll
through all partitions to which access has been assigned, and will
display the user number, authority level, open/close and global arm
options that were programmed for each partition to which the user
was granted access. For example:
Note that the "G" following the authority level indicates that the
global arm feature is enabled for this user in the displayed partition,
and that the period at the end of the second line indicates
Open/Close reporting is enabled for this user in the displayed
partition. The " " indicates the partition from which the user may
be changed or deleted.
Section 28 - User Access Codes
28-5