ADEMCO VISTA-128B Installation And Setup Gude page 92

VISTA-128B Installation and Setup Guide
ALL EVENT LOG
TYPE
TEST EVENT LOG
TYPE
To display the events in a particular category, press [8] at the desired category screen.
If in Display Mode, the most recent event is displayed. Press [1] to display older events; press
[3] to go forward in time.
If in Print Mode, the first press of [8] will cause the printer to print all events in that
category, with each event automatically scrolled on the display keypad. The following is a
typical display:
P8 01/01
BURGLARY
After the last event in the selected category has been displayed (using either the [1] or [3]
keys), the following will appear for a few seconds:
END OF EVENT LOG
TYPE
CLEAR EVENT LOG
0=NO 1=YES
ARE YOU SURE?
0=NO 1=YES
SCREEN DEFINITIONS
RECENT
COMPLETE
TYPE
CCC
UUU
16-4
Displays all categories of events in chronological order, from
most recent to the oldest.
CCC UUU
Displays all test events.
CCC UUU
Shows burglary alarm occurred in zone 3 of Partition 8, at
12:02A
12:02AM on January 1.
003
CCC UUU
Press [1] if Event Log Clear function is to be performed.
Clearing the event log does not erase any events from the system
memory. All events in the log will still be displayed if the
COMPLETE option is selected. Only those events occurring
from the time of the CLEAR command will be displayed if
RECENT display option is selected. Press [0] if event log is not
to be cleared at this time.
If [1] is pressed, the following will appear:
Press [1] if it is desired to clear the event log. Press [0] if event
log is not to be cleared.
Events since last CLEAR
Displays all events
Type of event (burglary, fire, etc.)
Zone (contact) number
User number