Figure 17-2: Wiring The 4100Apg With The Serial Printer - ADEMCO VISTA-128B Installation And Setup Gude

With the Event Log Printer
The serial printer must be configured for 1200 baud rate, seven data bits, even parity, and one stop
bit. (7/E/1).
To connect the 4100APG with a serial printer, perform the following steps:
Step Action
1 Perform the steps outlined for connecting 4100APG Without a Serial Printer.
2 Connect a DB-25 to DB-25 cable from the printer to the 4100SM. See figure 17-2.
3 Configure the printer for 1200 baud rate, seven data bits, even parity, and one
stop bit. (7/E/1).
6 7
Aux. Pwr
Aux. Gnd

Figure 17-2: Wiring the 4100APG With the Serial Printer

When you complete the module's mounting and wiring, you should install the module's cover
(with label affixed).
J8
4100SM
Red
8
Black
7
RxD
6
5
4
3
2
1
DB-25
Section 17 – 4100APG Pager Interface
1200 Baud Serial
Printer 7-E-1
DB-25
4100APG
DB-9
Serial Port Input
RJ-11
Line
To Telco
17-3