ADEMCO VISTA-128B Installation And Setup Gude page 154

VISTA-128B Installation and Setup Guide
06 DAYS? MTWTFSS
HIT 0-7
06 Permanent ?
0 = NO,1 = YES 0
24-20
To select the days which are to be activated, enter 1-7
(Monday = 1). An "x" will appear under that day, indicating the
x x
output for that day is active. Entering a day's number again
will deactivate that day. Pressing 0 will toggle all days on/off.
The outputs will only be in effect for the days which have the
letter "x" under them. As the week progresses, the selected
days are reset to the inactive state, unless the permanent
option is selected (next screen prompt).
When completed, press [∗] to continue.
Selecting "Permanent" (1) means that this schedule will be in
effect on a continuous basis. An answer of 0 means that this
schedule will be in effect for one week only. The letter "x"
under the day will then be cleared, but all other entries for the
output device will remain programmed.
Press [∗] to accept entry.
The system will quit User Scheduling Mode and return to
normal operating mode.