Temporary Schedules - ADEMCO VISTA-128B Installation And Setup Gude

Hol A1 Window 2 ?
00:00 00:00 00
Quit ?
1 = YES 0 = NO 0

Temporary Schedules

Each partition can be assigned a temporary schedule, which will override the regular
open/close schedule (and the holiday schedule). This schedule takes effect as soon as it is
programmed and remains active for up to one week.
Temporary Schedule Worksheet
Partition/Windows
1 Disarm Window
Start Time
Stop Time
Arm Window
Start Time
Stop Time
2 Disarm Window
Start Time
Stop Time
Arm Window
Start Time
Stop Time
3...8 Disarm Window
Start Time
Stop Time
Arm Window
Start Time
Stop Time
Temporary Schedules Programming
Enter [User Code] + [#] + 81 to enter this mode. Note that only users with authority level
of manager or higher can program temporary schedules. A temporary schedule only affects
the partition from which it is entered.
Temporary schedules can also be reused at later dates simply by scrolling (pressing [#]) to
the "DAYS?" prompt (described below) and activating the appropriate days. This should be
considered when defining daily time windows.
Press [∗] to continue.
Enter the second time window number for holidays for this
access schedule. As the number is keyed in, the actual time
that has been stored for the window will be displayed.
Press [∗] to continue.
Enter 0 at the "Quit ?" prompt to return to the main menu
choices and continue programming.
Enter 1 to quit Scheduling Menu Mode.
Mon
HH:MM
HH:MM
HH:MM
HH:MM
HH:MM
HH:MM
HH:MM
HH:MM
HH:MM
HH:MM
HH:MM
HH:MM
Section 24 – Scheduling Options
Tue Wed Thu Fri Sat Sun
24-17