ADEMCO VISTA-128B Installation And Setup Gude page 134

VISTA-128B Installation and Setup Guide
DEVICE PROG?
1 = YES
OUTPUT PGM?
1 = YES
RLY VOICE DESCR?
1 = YES
CUSTOM INDEX ?
1 = YES
ACCESS POINT PGM
1 = YES
ACCESS GRP PGM
1 = YES
EVENT/ACTION PGM
1 = YES
23-2
For defining the following device characteristics for addressable
devices, including keypads, RF receivers (5881), output relay
0 = NO
modules (4204/4204CF), 4285/4286 VIP Module, ECP long range
radio (7820), and vista gateway module:
•
Device Address
•
Device Type
•
Keypad Options (incl. partition assignment)
•
RF House ID
•
LRR Options (incl. programming radio)
For defining output relay functions.
0 = NO
For entering voice descriptors for relays to be used with the 4285/4286
VIP Module.
0 = NO
For creating custom word substitutes for VIP Module annunciation.
0 = NO
For defining the parameters for each of the VistaKey zones including
which group(s) have access through an access point (door). See the
0 = NO
VistaKey-SK Installation and Setup Guide for the detailed programming
instructions.
For defining the capabilities (privileges) for each group of users. See the
VistaKey-SK Installation and Setup Guide for the detailed programming
0 = NO
instructions.
For defining events and time windows for an access group. See the
VistaKey-SK Installation and Setup Guide for the detailed programming
0 = NO
instructions.