Setting And Unsetting; Alarms And Reset; Security Levels - Eaton Menvier 20 Administrator's And User Manual

Table of Contents

Advertisement

Menvier30/40/100/300
This guide covers four types of control unit: the Menvier30, Menvier40,
Menvier100 and Menvier300. A complete system using one of these control
units comprises:
Control unit
Fixed detectors
External Siren/Strobe
Users
Portable 4-button remote
controls (one per user)
Portable two-button hold up
alarms (one per user)
To find out which system you have see "What System Have I Got?" on
page 108.

Setting and Unsetting

The majority of alarm systems are intended to detect the movements of
people, and to notify others when people move into protected areas.
Readying the system to start an alarm when someone moves into a
protected area is called "setting" the system. Disarming the system so that
people can move freely is called "unsetting" the system.

Alarms and Reset

When the system starts an alarm it usually includes activating sounders
and strobes and sending messages to an Alarm Receiving Centre (ARC).
The ARC may then call the police or other security service to come and
investigate the alarm.
Before you can set the system again you must silence the sounders and
then "reset" the system so that it is ready for setting again (see page 15 for
instructions). Please note that your Installer may have programmed your
system so that although you can silence the sounders, you cannot reset the
system yourself. Instead you have to call the Installer to come and check
the system and reset it for you.

Security Levels

At a site where all users have complete access to the whole site, then the
installer can program the control unit to provide four levels of security: Full
Set and three different Part Sets. Any user can put the alarm system into
any of the security levels. Each security level is a collection of one or more
detectors that monitors a different area. The highest security level is called
Menvier3
Menvier4
0
0:
30
40
4
5
50
100
50
100
50
100
1. Introduction
Menvier1
Menvier3
00:
00:
100
300
10
20
250
500
250
500
250
500
Page 3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Menvier 100Menvier 300Menvier 40

Table of Contents