Deleting Users - Eaton Menvier 20 Administrator's And User Manual

4. Administration
you want to assign to the user.
12. Press a button on a remote control
(one that is not currently registered
to any other user). If you do not
have one press .
Note: A Duress user cannot have a
remote control or radio HUD.
The display finally asks you to
press both buttons on any radio
HUD that you want to assign to the
new user.
13. Press both buttons on a radio HUD
that you wish to assign to the user.
If you do not have one for the user
press .
Note: A Duress user cannot have a
radio HUD.
The keypad gives a double "beep"
confirmation tone. The keypad
display shows that the new user
has been added to the system.
To add another user to the system repeat steps 5 to 13.
Otherwise, press  repeatedly to leave the Menu and save your changes.

Deleting Users

You must be a Master or Admin User to delete a user, see page 38. To
delete a user:
1. Make sure the display shows the
standby screen.
2. Press .
3. Key in your access code (or
present a tag).
Press  .
4.
Press .
5.
Page 56
Menvier30/40/100/300




Followed by:










