Eaton Menvier 20 Administrator's And User Manual page 90

4. Administration
29. Repeat steps 27 and 28 for all the
days you want the event to occur
on.
In the example this is Monday
through to Friday
30. Press .
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
31. Press  until the display shows the
ward that you want to set (or
unset).
Note: If you have a part setting
system then this step will not apply.
32. Press  to show the state you
want the ward to go to.
In the example, since we are
unsetting in the morning, this will
be "Unset".
33. Press .
The keypad gives a double "beep"
confirmation tone.
The display shows the first in the
list of exceptions. In our example,
there is only the one exception. If
there were more, you can press 
or  to scroll through the list.:
34. Press  to apply the exception.
The exception applies when the
end of the bottom line shows "yes".
35. Press .
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
Page 84
Menvier30/40/100/300













