4. Administration
Each time you activate a HUA the
keypad gives a double "beep"
confirmation tone.
The display shows information for
any radio HUD allocated to a user
of the system, for example:
Press to end the test.
9.
Proximity Tags
1.
Make sure the display shows the
standby screen.
2.
Press
.
3.
Key in your access code (or
present a tag, see page 11).
Press until you see:.
4.
Press .
5.
The display shows:
Press until you see:
6.
Press .
7.
The display asks you to present the
prox tag you wish to test to the
keypad.
If there are no prox tags available
the display briefly shows:
8.
Hold the prox tag against the front
of the keypad.
The keypad gives a double "beep"
confirmation tone.
The bottom line of the display
shows the user that the prox tag is
allocated to. (Any name
Page 70
Menvier30/40/100/300