Setting - Eaton Menvier 20 Administrator's And User Manual

3. Setting and Unsetting

Setting

1. Starting to Set
Do this:
a. Make sure the system is idle.
Secure all the windows and doors.
(The top line may show the
installer's name.)
b. Either key in your access code.
As you key in your code the
display shows a "*" for each digit.
OR present your tag.
Quick Set:
Quick set removes the need to use an access code or tag to start setting.
The installer must enable this facility for you. (Note that in order to make
the alarm system comply with certain regulations the installer may not be
allowed to provide this facility.)
Do this:
a. Press A, B, C or D.
The system starts the exit
process, there is no need to select
what to set.
Go to: 3. Finishing Setting.
2. Selecting What to Set:
Part Setting Systems
Do this:
The bottom line of the display
shows the first item in the setting
options menu.
Press  or  to select the option
a.
you want.
Page 22
Menvier30/40/100/300
The display shows:




The display shows:


The display shows:




↕

↕
