Keypad - Eaton Menvier 20 Administrator's And User Manual

4. Administration
Press .
a)
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
The control unit sounds a test tone
on the keypad sounders. Check
that you can hear them.
Press  again to turn the keypad
b)
sounders off.
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
17. Press  when you have finished
this test.
18. Press  to leave the siren test
menu.

Keypad

1. Make sure the display shows the
standby screen.
2. Press .
3. Key in your access code (or
present a tag).
Press  until you see:
4.
Press .
5.
The display shows:
Press  until you see:
6.
Press .
7.
This display tells you to press any
key on the keypad to test it. The
bottom line of the display shows
the number of the keypad, followed
Page 62
Menvier30/40/100/300





















