Eaton Menvier 20 Administrator's And User Manual page 56

4. Administration
See page 52.
9. Press any button on the device
that you wish to register. Hold the
button down until you see the
transmit LED flash.
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
The control unit has learned the identity
of the device and linked it with your
access code.
If the control unit has already
learned that device then you will
hear a low tone and the display
tells you that the device is already
in use.
If you do not wish to register a device press .
If you have a device and want to know who it belongs to then use the Test -
Remotes menu option, see page 58 .
Radio Hold Up Alarms (HUA)
No user can change any other user's radio HUD. (A Master User or Admin
User can register a radio HUD for a new user when they first add the user
to the system, see page 53.) Any user except a Guard or Set Only user can
register a radio HUD for themselves.
Note: While you are registering a new radio HUD the control unit will not
respond to an alarm signal from any radio HUD it has already
learned.
1. Make sure the display shows the
standby screen.
2. Press .
3. Key in your access code (or
present a tag).
Press  .
4.
If you are a Master or Admin User:
Page 50
Menvier30/40/100/300


followed by:









