Calendar Set - Eaton Menvier 20 Administrator's And User Manual

4. Administration
of March will be 01/03/2010.
Press .
9.
The top line of the display shows
"Set the Time" and the bottom line
of the display shows the current
system time. The minutes are
highlighted.
10. Key in the correct time. Use the 24-
hour clock in the format hh/mm. If
the hours or minutes are "9" or less
then key in a leading zero. For
example: six minutes past seven in
the morning will be "07:06".
11. Press .
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
The control unit has saved your
changes and returned the display
to the date and time menu option.
Note: The internal clock adjusts itself for daylight saving in Spring and
Autumn.

Calendar Set

Not available on the Menvier30.
Using the calendar set option you can program the control unit to set or
unset the alarm system (or parts of it) at fixed times of day on a seven day
cycle. If the system is set up as a part setting system then you can use this
option to Full Set, Unset or Part Set-B, -C or -D the system. If the system is
set up as a Ward based system then this option allows you to Full Set,
Unset or Part Set any collection of wards.
There are two basic elements that you can program within the calendar set
option: the "event" and the "exception".
Each event specifies:
A 12 character name as a reminder of the purpose of the event.
A time on the 24 hour clock
Page 76
Menvier30/40/100/300





