Using Radio Keypads And Remote Controls; Using A Radio Keypad - Eaton Menvier 20 Administrator's And User Manual

3. Setting and Unsetting
How Do I Know The System Is Unset?
The keypad stops the entry tone
and gives a double "beep". The
system is unset.
The keypad display shows:
On a part setting system, LEDs
"A" to "D" should be dark, showing
that the system is unset.
Note: The installer may have disabled
the LEDs to ensure that the
alarm system meets the
appropriate standards.
Using Radio Keypads and Remote
Controls.

Using a Radio Keypad

Setting
Secure all your windows and doors. Make sure the system is in standby,
and that you can hear the warning tones from the sounders.
1. Key in a valid access code (or present your proximity tag).
2. Press either A, B, C or D to set the portion of system that you require.
(If you wish to stop setting while the exit tone sounds, then press
The left hand LED glows to show that the keypad is transmitting.
Page 30
Menvier30/40/100/300


followed by:


.)