Menvier30/40/100/300
The display shows the first
button on the remote control.
Note: Only the "*" button (Part set) is
available on a FOB-2W-4B.
Press or to show the button
d)
you wish to re-program.
Press to select the button.
e)
The bottom line shows:
Note: If your system is a part setting
system (there are no wards)
then you cannot reprogram the
unset key on a remote control.
If your system is a ward based
system then the unset button
can only be programmed to
unset all wards allocated to the
user, or unset individual wards
allocated to the user.
10. Choose either Set or Unset, as
follows:
a) Press .
In the example on the right, the
button is currently programmed to
unset.
b) Press to change the bottom
line between Set or Unset:
4. Administration
Page 93