Eaton Menvier 20 Administrator's And User Manual page 45

Menvier30/40/100/300
standby screen.
2. Press .
3. Key in your access code (or
present a tag, see page 11)).
Press .
4.
The display shows:
Press .
5.
The display shows the first in a list
of the available shunt groups:
Press  or  to scroll up or down
6.
the list to show the shunt group
you want.
The display shows the current
status of the select shunt group:
Press  or  to change the status
7.
of the shunt group.
"No" means that the zones in the
group are "unshunted" (or
restored).
"Yes" means that the zones in the
group are "shunted".
Press . to confirm your change.
8.
The display shows.
Using a Shunt Code
If you have set up a shunt code (see "Shunt Group" user type on page 9)
then you can activate and deactivate any shunt group associated with that
code as follows:
1. Make sure the display shows the
standby screen.
2. Key in the shunt code (or present a
tag).
The display shows a message
telling you which shunt group has
been activate ("1" in the example
4. Administration


















Page 39