Adding Users - Eaton Menvier 20 Administrator's And User Manual

Menvier30/40/100/300
of the display shows your own user
name.
Press .
d)
Press  or  until the bottom line
e)
shows the device you wish to delete,
for example:
f) Go on to step 8.
If you are a Normal User, Ward User or
Easy Set:
Press .
6.
Press  until the display shows the
7.
device you wish to delete, for
example:
Press .
8.
The bottom line of the display asks if
you wish to delete the device you
selected.
Press 
9.
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
The control unit has deleted the
identity of the Hold Up Alarm (or
other device you selected).
To register a new device, re-enter the Menu and select Users - Edit User.
Select your own user name (or number) and then the device type you wish
to add.
If a remote control or two-way keyfob has been stolen and the user it
belonged to no longer has an access code on the system, see page 99.

Adding Users

You must be a Master or Admin User to add new users, see page 38.
4. Administration













followed by:


Page 53