Eaton Menvier 20 Administrator's And User Manual page 93

Menvier30/40/100/300
Press  or  to display the output
8.
you wish to edit.
Press .
9.
The bottom line of the display
shows the first option that you can
edit for the output: "Name".
10. Press .
The display shows the current
name of the output, and places a
cursor at the beginning of the
name.
11. Key in a meaningful name for the
output. (Hint: see Editing Text on
page 36.)
The name you give the output
appears in all the other menus the
display offers for controlling
outputs.
12. Press .
The keypad gives a double "beep"
confirmation tone. The display
returns to the Name option.
13. Press 
The display shows:
14. Press .
There are two options to "Latched".
"Yes". The output stays on until a
user deliberately turns it off. In
addition, you can program the
output to come on and go off at
fixed times (see the next section).
"No". The output goes on when a
user turns it on, but then goes off
4. Administration














Page 87