Editing Existing Users - Eaton Menvier 20 Administrator's And User Manual

Menvier30/40/100/300
A Normal, Ward User or Easy Set User can:
Edit their own user code, and delete or add their own proximity tag,
remote or radio HUD.
A Duress code user cannot have a proximity tag, remote or radio HUD, and
has no access to the Menu.
Guards and Set Only users have no access to the Menu.

Editing Existing Users

This menu lets you change the details for an existing user. Note that you cannot
edit a user when the ward they belong to is set.
Name
Use this option to give the user a name up to 12 characters long.
1. Make sure the display shows the
standby screen.
2. Press .
3. Key in your access code (or
present a tag).
Press  .
4.
Press .
5.
Press  .
6.
Press  .
7.
The bottom line of the display
shows the first in a list of the users
already programmed into the
control unit. If the user already has
a name programmed it will appear
on the bottom line.
Press  or  to display the user
8.
you wish to edit.
(Alternatively, if you already know
their user number, you can key that
4. Administration
















Page 41