Eaton Menvier 20 Administrator's And User Manual page 58

4. Administration
register. Hold the buttons down until
you see the transmit LED flash.
The keypad gives a double
"beep" confirmation tone. The
keypad display shows:
The control unit has learned the
identity of the Hold Up Alarm and
linked it with your access code.
You cannot register more than one radio HUD per user. If the control unit
has already learned that radio HUD then you will hear a low tone and the
display will show the message "Hold Up Alarm already in use".
If you have a radio HUD and want to know who it belongs to then use the
Test – User Hold Up Alarms menu option, see page 58 .
Deleting Remote Controls, Two-way Keyfobs, Tags and
Radio HUDs
If you have lost a remote control, two-way keyfob, prox tag or radio Hold Up
Device assigned to you then you should delete it from the system to make
sure that no unauthorised person can use it.
1. Make sure the display shows the
standby screen.
2. Press .
3. Key in your access code (or
present a tag).
Press  .
4.
If you are a Master or Admin User:
(otherwise, go to step 6)
Press .
5.
Press .
a)
Press .
b)
Press  or . until the bottom line
c)
Page 52
Menvier30/40/100/300
followed by:

















