Twoway Key Fob - Eaton Menvier 20 Administrator's And User Manual

1. Introduction
1. Full Set.
2. Part Set.
3. (Programmable, see page
91.)
4. Unset.
5. Transmit LED.
Each remote control has a unique electronic identity. When you assign a remote
control to a user you teach the identity to the control unit. You may assign one (and
only one) remote control to each user.

TwoWay Key Fob

The two-way keyfob, FOB-2W-4B, is a remote control designed to give you
confidence that your alarm system has set or unset correctly. When you
operate the buttons on the fob, the control unit sends back signals which
light up one or more LEDs on the fob to let you know what is happening.
The LEDs can show whether your system has set or not, or if there has
been an alarm while you have been away.
Figure 4 shows you where they are.
Page 12
Figure 3. Remote control Buttons.
Menvier30/40/100/300
A
B