Eaton Menvier 20 Administrator's And User Manual page 95

Menvier30/40/100/300
First make sure that the output you wish to use is programmed as Latched
= Yes (see steps 1 to 16 starting on page 86).
17. Press  until the display shows:
18. Press .
The display shows the time when
the output will turn on.
19. Key in the time when you want the
output to come on. Use the 24-hour
clock in the format hh/mm. If the
hours or minutes are "9" or less
then key in a leading zero. For
example: six minutes past seven in
the morning will be "07/06".
20. Press .
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
21. Press  until the display shows:
22. Press .
The display shows the time when
the output will turn off.
23 Key in the time when you want the
output to go off. Use the 24-hour
clock in the format hh/mm. If the
hours or minutes are "9" or less
then key in a leading zero. For
example: six minutes past seven in
the morning will be "07/06".
24. Press .
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
Note: If you do not wish the output to switch on and off at a set time
then leave the "On Time" and "Off Time" options set to
4. Administration
















Page 89