4. Administration
installer. You can use the About menu to check if you have a
communication module fitted, see page 108.
If you need to re-direct speech messages to new telephone numbers then:
1.
Make sure the display shows the
standby screen.
2.
Press
.
3.
Key in your access code (or
present a tag).
Press until you see:.
4.
Press .
5.
Press until the display shows:
6.
Press .
7.
Press until the display shows the
8.
telephone number that you wish to
change, for example:
Press .
9.
The display shows the current
phone number, for example:
10. Key in the new phone number.
If necessary, press to move the
cursor left, or to move the cursor
to the right. Press to remove
digits to the left of the cursor.
11. Press to store the changes you
have made.
The display now shows the current
name of the telephone number.
12. If necessary, key in a new name for
Page 106
Menvier30/40/100/300