Sounder Volume Levels (At 1M); Fuses; Electrical Safety; Other - Eaton i-on160EX Installation Manual

Technical Specification

Sounder Volume Levels (at 1m)

i-kp01 (at max volume)
Expander sounders
Expander 16 Ohm loudspeaker

Fuses

The control unit has a replaceable T500mA mains
fuse.

Electrical Safety

Conforms to EN60950-1.

Other

If you wish to connect the i-on160EX control unit
to a PC using either the Ethernet or the USB port
then make sure that the cables have the following
specifications:
Ethernet Cat5e patch cable, straight or
crossed, RJ45 male plugs at
each end, suitable for
10/100Base-T.
USB Mini-B plug for control unit end,
USB-A for PC end. Max length
3m.

Radio Expander and Keypads

Radio Operating frequency
868.6625MHz Narrowband.
EN 300 220-3.
EN 300 330-2
Transmitter The range of the transmitters
range compatible with this control unit
depends on the environment in
which they are installed. As a
guideline, most transmitters will
work up 200m range in free
space conditions.

Compliance Statements

The i-on160EX is compliant with EN50130-5
environmental class II.
The i-on160EX is suitable for use in systems
designed to comply with PD 6662: 2010 at grade
3.
When installed correctly the i-on160EX is capable
of compliance with EN50131 at Grade 3.
To maintain Grade 3 the i-on160EX must be fitted
with a communicator of level ATS4 or above.
When fitted with radio devices the i-on160EX is
capable of compliance with EN50131 at Grade 2.
The i-sd02 is compliant with EN50136-1 as an
ATS2 communicator.
The i-sd02 may be used as a supplementary
communicator at Grade 3.
Page 36
At Grade 2 the i-sd02 provides a compliant
communicator for the i-on160EX provided that:
70dB
a) It is installed in accordance with the
70dB
installation instructions.
93dB
b) The connected PSTN is functioning normally.
When fitted with an i-sd02 this product provides
options A, B and C at Grade 2 as noted in Table
10 of EN50131-1:2006+A1:2009.
If the installer selects a non-compliant
configuration then they must remove or adjust
compliance labelling
Third party testing carried out by Anpi.

Compatible Equipment

HUD

705rEUR-00
706rEUR-00
710rEUR-00
726rEUR-50
726rEUR-60

Detectors

713rEUR-00
714rEUR-00
720rEUR-00
734rEUR-00/01
734rEUR-05/06
738rEUR-00/04
739rEUR-50
DET-RDCS
XCELR
XCELRPT
XCELW
XCELWPT

Sounders

760ES
9040UK-00
Setting / Unsetting – Keypads
i-rk01
i-kp01
KEY-EP
KEY-K01
i-on160EX
Two button HUD (single
channel, top button is
disabled)
Two button HUD/tilt switch
transmitter
Two button HUD
Long range hand held HUD
Short range hand held HUD
Pet tolerant PIR
PIR Transmitter (Small case)
Smoke Detector Transmitter
CC/FSL Door Contact
Transmitter (white)
CC/FSL Door Contact
Transmitter (brown)
Spyder shock sensor
(white/brown)
Sentrol glass break detector
Combined door contact
shock sensor transmitter
Radio PIR
Pet tolerant radio PIR
Wired PIR
Pet tolerant wired PIR
External Wireless sounder
Speaker boxed
Radio Keypad
Keypad (with internal prox
reader, but without zones or
external prox reader)
External prox reader for
KEY-KPZ01/KP01
keypad