4. Administration
1.
Make sure the display shows the
standby screen.
2.
Press
.
3.
Key in your access code (or
present a tag).
Press .
4.
Press .
5.
Press .
6.
Press .
7.
The bottom line of the display
shows the first in a list of the users
already programmed.
Press or to display the user
8.
you wish to edit.
(Alternatively, if you already know
their user number, you can key
that in and the display will show
that user immediately.)
Press .
9.
The bottom line shows:
10. Press until the display shows:
Press .
11.
12. Press or to scroll through the
list of wards.
On the bottom line of the display
"Yes" means that the user is
assigned to the ward, "No" means
that the user is not assigned to the
ward.
Page 44
Menvier30/40/100/300