Eaton Menvier 20 Administrator's And User Manual page 70

4. Administration
Press  until you see:.
4.
Press .
5.
The bottom line of the display
shows:
Press  until you see:
6.
Press .
7.
The bottom line of the display
shows:
Press  or  to turn a chime tone
8.
on or off.
When the chime tone is on, the
keypads and loudspeakers will
sound a chime tone for each zone
that triggers while you are
performing the walk test.
Press . to see the first of the walk
9.
test options:
The Walk Test menu provides three options to give different ways of
organising a walk test. The options within Walk Test are:
System This option allows you to walk round the entire system and test all
the zones. Press  to select this option.
Wards (Only in ward based systems.) Use this option to select one
or more wards, and test the zones only within those wards.
Press  or  to scroll up and down the list of wards. Press
 or  to display "Yes" at the end of the bottom line to mark
the ward as one you want to test. Press  when you have
finished making your selection.
Zones This option lets you select one or more individual zones, and
test only those zones and no others.
Press  or  to scroll up and down the list of zones. Press
 or  to display "Yes" at the end of the bottom line to mark
the zone as one you want to test. Press  when you have
finished making your selection.
Page 64
Menvier30/40/100/300









