Eaton Menvier 20 Administrator's And User Manual page 61

Menvier30/40/100/300
In a ward based system the display
shows:
Note: If you are adding a Master User
this display will not appear. The
system allocates Master Users to
all wards.
Press  or  to scroll through the
a)
list of wards.
On the bottom line of the display
"Yes" means that the user is
assigned to the ward, "No" means
that the user is not assigned to the
ward.
Press  to change the "Yes" to a
b)
"No" or back again.
See page 4 for a description of
wards.
Press  when you have finished
c)
assigning the user to their wards.
The display asks you to assign a
new user code.
9. Key in the user code you want the
new user to employ. ( If you do not
want to assign a code to the user
press  and go to step 11.)
The display asks you to confirm
the new code.
10. Key the code in a second time.
The display asks you to present a
proximity tag to the keypad.
11. Present an unused tag to the keypad.
(If you do not want to assign one to the
user press .)
The display then asks you to press
a button on any remote control that
4. Administration














Page 55