Eaton Menvier 20 Administrator's And User Manual page 49

Menvier30/40/100/300
Press  .
7.
The bottom line of the display
shows the name or user number of
the first in a list of the users already
programmed into the control unit. In
the example shown the name is
"User 001".
Press  or  to display the user
8.
you wish to edit.
(Alternatively, if you already know
their user number, you can key that
in and the display will show that
user immediately.)
Press  .
9.
The bottom line shows:
10. Press  .
11. Press .
The bottom line of the display shows the
current user type. See page 8 for a
description of the user types available. A
"*" at the beginning of the line is there to
remind you of the current type if you scroll
away.
Press  or  to scroll through the
12.
list of user types available.
Press  to assign the user type to
13.
the user.
The keypad gives a double "beep"
confirmation tone.
Wards
(If your system is a part setting system then you will not see this option)
Use this option to assign users to one or more wards.
Note: You cannot change User 001's wards. User 001 always belongs to all
wards.
4. Administration















Page 43