Editing Text; Omitting Zones - Eaton Menvier 20 Administrator's And User Manual

4. Administration Menvier30/40/100/300
The rest of this chapter describes each of the main options in the Menu.

Editing Text

For many of the items that you can program, the control unit lets you assign
a 12 character name. To key in text for the name press each number key
one or more times to obtain the letter you want (the letters of the alphabet
appear on the keys in the same arrangement as on many mobile phones,
see Figure 9.)
Press # to change between capitals and lower case letters.
The cursor becomes an underline when you type in small letters and a
block when you type in capitals.
Press  to move the cursor left, or  to move the cursor to the right.
Press  to remove letters to the left of the cursor. Press  to insert a
space.
A B C D E F
G H I J K L M N O
P Q R S T U V W X Y Z
(Caps/
Space 0
lower case)
Figure 9. Letters Assigned to Keys

Omitting Zones

You may wish to prevent a zone causing an alarm. For example, if your
garage door is protected by a detector, but you wish to leave it unlocked for
the delivery of a parcel, you may wish to omit that detector when you set
the rest of the alarm system. Provided that the Installer has programmed
your system to allow this, then, to "Omit" a zone.
Page 36